Building stone
At Harris Quarries we know how important it is to get your project right from the start and one of the first things to decide is what to build your project from. We have over thirty years experience in supplying building stone and can match almost any type of stone with either new, reclaimed or new stone made to look old. We offer a stone matching facility and if we can not source your requirements we can manufacture and prematurely age any stone using several procedures to make any type of walling stone to your specific requirements. We carry in stock, ready for immediate delivery a large quantity of 140mm coarsed gritstone that is packed on 6.7 m2 packs. We also have a large quantity of random walling stone either pitch faced or cropped. Most of our building stone is roughly 100mm on bed but if you require it to be 150mm we can accommodate this. Our re claimed building stone varies from small flat face (Delph) to large punch face walling and it has all been prepared for re walling. Any of our reclaimed stone can be purchased coursed and palleted, or loose in any quantity required.
We offer a nationwide delivery service and have access to thousands of metres of walling stone that can be on your site within days of ordering.
 |
 |
 |
| Cropped, sawn bedded, coursed rotherham red sand stone with half tooled texturing coping stone. | Sawn bedded pitch faced coursed gritstone walling | Tooled, textured coursed waling stone. This project was made to match an existing building |
 |
 |
 |
| Packs of pitch faced coursed gritstone walling | Sawn bedded dressed limestone walling. Three sized, 65mm, 140mm, 215mm |
Reclaimed delph stone supplied to match an existing building |
 |
 |
|
| Sawn bedded rumbled limestone walling. Other sizes include 100mm, 215mm | Pitch faced coursed Rotherham red walling 140mm up to 230mm |